BLOGGER TEMPLATES AND TWITTER BACKGROUNDS »

Wednesday, January 24, 2024

Ninja Foodi Pork Tenderloin

Ingredients:
1 pork tenderloin, approx. 3 1/2 lb.
Cavender's Greek Seasoning
4 Tblsp. vegetable oil + 4 Tblsp. vegetable oil
2 cups water

Preparation:
1. Cut pork loin in half.

2. Coat entire outside of each piece of pork loin with Cavender's, pressing it lightly into meat.

3. Turn on the Ninja Foodi, and press the SEAR/SAUTE button.

4. Press START.

5. Put 4 Tblsp. oil into cooking pot of Ninja Foodi.

6. Once oil is hot, put one half of the pork loin into the cooking pot. Sear pork loin on all sides, so that it is crispy and slightly hard to the touch and the seasoning is locked onto the meat. You may need to spread the oil around to achieve this.

7. Remove the half pork loin to a plate, and repeat step 6 with the other half.

8. Once both halves are seared, turn off the Ninja Foodi, and insert the cook & crisp plate.

9. Pour water into the Foodi.

10. Place both halves of the pork on the cook & crisp plate, arranging them so that they don't overlap and so the lid will close securely.

11. Close the crisping lid, press the AIR CRISP button, and set the temperature to 400 for 10 minutes, and press the START button.

12. After 12 minutes, open the lid, and use tongs to turn the pork loins over. Brush the top of the pork loins with oil.

13. Repeat step 11.

14. After the second set of 12 minutes of cooking, open the Ninja Foodi, and test the center temperature of each pork loin half with a meat thermometer.

15. Continue repeating steps 11 and 12 in 4-minute increments until the center temperature of each pork loin half is 130 degrees.

16. Let pork loins sit in closed Ninja Foodi pot for at least ten minutes before serving. Pork is safe to eat at an internal temperature of 145 degrees, which should be achieved by carryover cooking.

17. Slice and serve immediately.


Ninja Foodi Chicken Quarters

Ingredients:
4 chicken leg quarters, skin intact
Salt
2 cups water
Sauce of choice or 3 Tblsp. vegetable oil

Preparation:
1. Lightly salt the front and back of each piece of chicken.

2. If sauce is desired, rub sauce onto all sides of chicken. If not, rub chicken with oil on all sides.

3. Turn on the Ninja Foodi, and press the PRESSURE button.

4. Put cook & crisp plate into cooking pot.

5. Pour water into the Foodi.

6. Place chicken onto cook & crisp plate, standing pieces up. It's ok if they touch. 

7. Place the pressure lid on the Ninja Foodi, and lock the lid in place.

8. Turn the pressure valve to SEAL.

9. Turn on the Ninja Foodie, and press the PRESSURE button.

10. Set the TIME to 20 minutes, then press START (leave temperature on HIGH).

11. The Ninja Foodi will take several minutes to pressurize, then will cook for 20 minutes. Once the 20 minutes of cooking is completed, allow the pressure to natural release for 8 minutes.

12. After 8 minutes of natural release, open the pressure valve to release the remaining pressure.

13. Once the lid unlocks, use tongs to remove (carefully, as they will be tender), and coat with additional sauce or seasonings, as needed. You do not need to empty the water.

14. Close the crisping lid, press the AIR CRISP button, and set the temperature to 400 for 5 minutes, and press the START button.

15. After 5 minutes, open the lid, and use tongs to turn the chicken over.

16. Repeat step 13 a second time -- air crisp the chicken for 5 more minutes.

17. Once the second set of 5 minutes of crisping is done, verify that the chicken is crisp enough for your liking. If not, repeat for several minutes until chicken reaches desired crispness, then serve.

NOTE: The internal safe serving temperature for chicken is 165 degrees. When testing the temperature of bone-in meats, be sure that thermometer probe is not touching a bone.


 

Monday, January 22, 2024

Ninja Foodi Toasties (Grilled Cheese)

Ingredients:
2 pieces of hearty bread
Softened butter or butter spread
Mustard or other sandwich spread, if desired
Sliced cheese, enough to cover both slices of bread
Deli meat, if desired

Preparation:
1. Turn on the Ninja Foodi, and press the AIR CRISP button.

2. Put cook & crisp plate into cooking pot.

3. Butter outside of both pieces of bread, then turn over to non-buttered side to assemble sandwich.

4. Spread inside of bread with any desired sandwich spread or mustard.

5. Place sliced cheese on both pieces of bread.

6. Add deli meat, if desired, on top of cheese on one piece of the bread.

7. Close the sandwich.

8. Place the sandwich onto the cook & crisp plate, and close the crisping lid.

9. Set the temperature to 400 for 3 minutes, and press the START button.

10. After the 3 minutes of cooking is completed, open the Ninja Foodi, and use a spatula to flip the sandwich over.

11. Press the AIR CRISP button, then set the temperature to 400 for 3 minutes.

12. Press the START button.

13. Once the second 3 minutes of cooking is completed, open the Ninja Foodi and remove the sandwich to serve.




Saturday, January 20, 2024

Cupcake Cones

Ingredients:
package wafer ice cream cones, flat bottomed
1 cake mix, plus ingredients needed to complete
Frosting/decorations, as desired

Preparation:
1. Prepare one cake mix as directed on box.

2. Fill wafer cones 2/3 full with prepared cake mix.

3. Stand cones on cookie sheet or in muffin pan. Use aluminum foil to keep cones from falling over.

4. Bake according to package instructions for cupcakes.

5. Cool, then frost and decorate with colored sprinkles.



Darleen's Bourbon Balls

Ingredients:
1 lb. pecans, chopped
1 box vanilla wafers, crushed
1/3 cup bourbon
1/2 cup honey
Powdered sugar

Preparation:
1. Mix all ingredients well.

2. Roll dough into balls, then coat in powdered sugar.

3. Place balls in airtight container, layered with powdered sugar, and allow to sit for three days before serving.

 

Ann's Potato Salad

Ingredients:
1/4 cup green pepper or celery
5 medium potatoes
2 to 4 hard boiled eggs, chopped
1/2 cup white onion, diced
1 2-oz. jar pimento
1/2 cup pickles (sweet or dill), diced
13. cup mayonnaise
2 Tblsp. mustard
2 Tblsp. vinegar
1/4 tsp. salt
1/8 tsp. pepper

Preparation:
1. Boil potatoes, then peel and cut into squares. Mash some slightly.

2. In a mixing bowl, combine mayonnaise, mustard, vinegar, salt and pepper to make a sauce.

3. Mix eggs, onion, pimento and pickles into potatoes.

4. Add sauce to potato mixture.


Ann's Macaroni Salad

Ingredients:
3 cups elbow macaroni, cooked and drained
2 Tblsp. oil
1/2 green pepper, chopped
3 boiled eggs, diced
3 Tblsp. mayonnaise
1/4 tsp. garlic powder
1/8 tsp. celery seed
1/8 tsp. dry mustard
Salt and pepper

Preparation:
1. Mix oil into cooked pasta, then add remaining ingredients.

2. Refrigerate to cool before serving.


Tata's Kidney Bean Salad (Grumpy's mom)

Ingredients:
1 egg
1 Tblsp. flour
3 Tblsp. water
3 Tblsp. vinegar
White onion, chopped
1 Tblsp. butter
1 Tblsp. milk
2 Tblsp. sugar
2 cans kidney beans, drained and rinsed
Sweet pickles, chopped

Preparation:
1. Slightly beat egg.

2. Cook egg and flour over low heat, stirring constantly, until mixture thickens.

3. Add water and vinegar and stir vigorously until creamy.

4. Add milk and sugar.

5. Pour mixture over kidney beans.

6. Add sweet pickles and white onion, to taste.

7. Let stand several hours before serving.

NOTE: Sauce can also be used as cole slaw dressing.

Aunt Jo's Green Beans

Ingredients:
Canned green beans
Canned tomatoes, diced
Lean, thinly sliced steak
Onion, finely sliced
Nutmeg
Cinnamon
Lemon juice
Butter

Preparation:
1. Brown onion and steak in butter.

2. Place all ingredients except lemon in a stewpot and simmer.

3. Coat chicken legs with oil or sauce, and season as desired.

4. Add lemon to taste, slowly while simmering.

5. Serve over rice.

Cream of Tomato Soup

Ingredients:
1 tsp. finely chopped onion
2 Tblsp. butter
3 Tblsp. flour
2 tsp. sugar
1 tsp. salt
1/8 tsp. pepper
2 cups tomato juice (can substitute 1 can tomato soup)
2 cups cold milk

Preparation:
1. Sauté onion in butter until clear.

2. Stir flour, sugar, salt and pepper into onion and butter, stirring constantly until smooth and bubbly.

3. Remove flour mixture from heat. Gradually stir in tomato juice or soup.

4. Bring to a boil, stirring constantly. Boil for one minute.

5. Stir hot mixture INTO cold milk gradually. Do NOT pour milk into hot mixture.

6. Return combined mixture to pot and heat to serving temperature, stirring constantly.

Ninja Foodi Chicken Legs

Ingredients:
6-7 medium chicken legs, thawed or frozen
1 cup water or chicken broth
2 Tblsp. olive oil or sauce of your choice
Salt and pepper, to taste

Preparation:
1. Turn on the Ninja Foodi, and press the PRESSURE button.

2. Put cook & crisp plate into cooking pot.

3. Coat chicken legs with oil or sauce, and season as desired.

4. Pour water into the Foodi.

5. Place chicken legs onto cook & crisp plate, being careful not to overcrowd the plate. 
NOTE: If you want to cook more than will fit on the plate, add the broil rack above the cook & crisp plate, then place additional chicken legs on that. 

6. Place the pressure lid on the Ninja Foodi, and lock the lid in place.

7. Turn the pressure valve to SEAL.

8. Turn on the Ninja Foodie, and press the PRESSURE button.

9. Set the TIME to 12 minutes, then press START (leave temperature on HIGH).

10. The Ninja Foodi will take several minutes to pressurize, then will cook for 12 minutes. Once the 12 minutes of cooking is completed, open the pressure valve to release the remaining pressure.

11. Once the lid unlocks, use tongs to turn chicken legs (carefully, as they will be tender), and coat with additional sauce or seasonings, as needed. You do not need to empty the water.
NOTE: If you used the broil rack, remove the chicken that was on the rack to a plate, and remove the broil rack. You will need to complete the next steps with just a single layer of chicken on the cook & crisp plate.

12. Close the crisping lid, press the AIR CRISP button, and set the temperature to 400 for 6 minutes, and press the START button.

13. After 6 minutes, open the lid, and use tongs to turn the chicken legs over.

14. Repeat step 12 a second time -- air crisp the chicken legs for 6 more minutes.

15. Once the second set of 6 minutes of crisping is done, verify that the chicken legs are crisp enough for your liking. If not, repeat for several minutes until they reach desired crispness, then serve.

16. If there are additional chicken legs that you removed from the broil rack, repeat steps 12-15 with those.


Thursday, January 18, 2024

Ninja Foodi Italian Chicken Pasta

Ingredients:
4 cups penne noodles (12 oz.)
2 cups chicken broth
1 lb chicken (about 2 boneless, skinless breasts) - can be precooked, fresh or frozen breasts or thighs, cut into bite-sized pieces
2 Tblsp. olive oil
1/2 cup Italian dressing
1 cup shredded (fresh) Parmesan cheese
8 oz. (1 package) cream cheese, room temperature
Salt and pepper, to taste

Preparation:
NOTE: If chicken is frozen but not cut into pieces:
+ Lay chicken in bottom of cooking pot. 
+ Add 3/4 cup water or broth. 
+ Place the pressure lid on the Ninja Foodi, and lock the lid in place. 
+ Turn the pressure valve to SEAL. 
+ Turn on the Ninja Foodi, and press the PRESSURE button (leave temperature on HIGH). 
+ Set the TIME to 10 minutes, then press START. 
+ The Ninja Foodi will take several minutes to pressurize, then will cook for 10 minutes. 
+ Once finished, release the pressure, remove the chicken, and chop it into bite-sized pieces. 
+ Drain the pot, then continue with recipe.

NOTE: If chicken is already cooked, skip to step 5.
NOTE: If chicken is frozen but already cut into bite-sized pieces, continue with recipe.

1. Turn on the Ninja Foodi, and press the SEAR/SAUTE button.

2. Put olive oil in cooking pot, then add chicken pieces.

3. Sauce the chicken, cooking until the outsides are no longer pink. Turn off the Ninja Foodi.

4. Scrape any stuck meat off the bottom of the pot with a bit of broth and a wooden spatula.

5. Place (or leave) meat on the bottom of the cooking pot.

6. Cut the cream cheese into chunks and place chunks on top of chicken (sautéed, frozen or fresh).

7. Pour 1/2 cup of broth over the top, and sprinkle with salt and pepper.

8. Pour in uncooked penne pasta on top. Leave ingredients in layers -- do not stir.

9. Pour remaining 1 1/2 cups of broth over the top of the noodles.

10. Pour Italian dressing over noodles.

11. Make sure noodles are as submerged into broth as possible.

12. Place the pressure lid on the Ninja Foodi, and lock the lid in place.

13. Turn the pressure valve to SEAL.

14. Turn on the Ninja Foodie, and press the PRESSURE button.

15. Set the TIME to 5 minutes, then press START.

16. The Ninja Foodi will take several minutes to pressurize, then will cook for 5 minutes. Let the pressure natural release for 2 additional minutes, once the 5 minutes of cooking is completed.

17. After the 2 minutes of natural release, open the pressure valve to release the remaining pressure.

18. Once the lid unlocks, open and stir the pasta, meat and cream cheese together.

19. Sprinkle in Parmesan cheese, and gently fold noodles and meat together again. 

20. Set/close lid on pot (no need to seal). Let pasta sit for 5 minutes to allow cheese to melt, sauce to thicken and noodles to continue to soften, then serve.

Sunday, January 14, 2024

Ninja Foodi Spaghetti and Meat Sauce

Ingredients:
12 oz spaghetti or angel hair noodles, broken in half
1 (43-45 oz) jar spaghetti sauce
2 lbs (or less) ground beef, thawed
3 cups beef broth or water

Preparation:
1. Place the ground beef in the cooking pot.

2. Turn on the Ninja Foodi, and press the SEAR/SAUTE button.

3. Press START.

4. Cook the ground beef, breaking it up while cooking.

5. When beef is almost fully cooked, turn off the Ninja Foodi.

6. If there is a substantial (visible) amount of grease in the bottom of the cooking pot, blot it up with paper towels; or remove the beef, drain the grease, and then put the beef back in the pot.

7. Spread the broken noodles over the beef, making sure to have them crossed up and separated, not in a big clump.

8. Add water/broth, then pour spaghetti sauce over the noodles.

9. Gently "stir" the spaghetti, meat and sauce, in an attempt to mix some sauce and meat in between some of the noodles. Try to make sure the noodles are mostly covered by either sauce or broth.

10. Place the pressure lid on the Ninja Foodi, and lock the lid in place.

11. Turn the pressure valve to SEAL.

12. Turn on the Ninja Foodi, and press the PRESSURE button (leave temperature on HIGH).

13. Set the TIME to 5 minutes, then press START.

14. The Ninja Foodi will take several minutes to pressurize, then will cook for 5 minutes. Let the pressure natural release for 5 additional minutes, once the 5 minutes of cooking is completed.

15. After the 5 minutes of natural release, open the pressure valve to release the remaining pressure.

16. Once the lid unlocks, open and stir the pasta and meat together, then serve.

Saturday, January 13, 2024

Ninja Foodi Quick Alfredo Noodles

Ingredients:
12 oz. dry pasta
1 16-22 oz. jar alfredo sauce
3 cups chicken broth
1 Tblsp. dried parsley

Preparation:
1. Pour chicken broth into cooking pot.

2. If using long pasta (full-length fettuccine, angel hair, spaghetti, etc.), break pasta in half.

3. Place pasta in cooking pot.

4. Pour entire jar of sauce over noodles.

5. Sprinkle dried parsley over the top of the sauce, then lightly stir. If using long noodles, make sure they are separated and not in a big clump.

6. Place the pressure lid on the Ninja Foodi, and lock lid in place.

7. Turn pressure valve to SEAL.

8. Turn on the Ninja Foodi, and press the PRESSURE button (leave temperate on HIGH).

9. Set the TIME to 3 minutes. then press START.

10. The Ninja Foodi will take several minutes to pressurize, then will cook for 3 minutes. Let the pressure natural release for 5 minutes once the 3 minutes of cooking is completed.

11. After the 5 minutes of natural release, open the pressure valve to release the remaining pressure.

12. Once the lid unlocks, open and stir the pasta. Allow it to thicken for 5-10 minutes, then serve.

NOTE: Rotisserie or cooked chicken can be stirred in before serving, once all cooking is complete. Chicken can also be cooked ahead of the above process using the SEAR/SAUTE functions of the Ninja Foodi and a little oil to sear bite-sized pieces of fresh chicken. Once chicken pieces are seared, begin with step 1 above. Leave seared (not fully cooked) chicken in the cooking pot, and stir it into the uncooked pasta, broth and sauce. It will continue cooking along with the noodles.

Ninja Foodi Chicken Wings

Ingredients:
Chicken wings, separated/cut into drums and flats
1 cup chicken broth
Dry seasoning(s) of choice
2 Tblsp. oil

Preparation:
1. Put Cook & Crisp plate into Ninja Foodi cooking pot. You will use the attached crisping lid for cooking.

2. Pour the cup of chicken broth into the cooking pot.

3. Dry the wings off well with a paper towel.

4. Toss the wings in the oil, and add dry seasonings to the wings.

5. Place the wings onto the Cook & Crisp plate in a single layer.

6. Close the crisping lid. 

7. Turn on the Ninja Foodi, and press the AIR CRISP button.

8. Make sure the temperature displayed is 390. If it is not, change the temperature to 390.

9. Set the TIME to 12 minutes, and press the START button.

10. As soon as the 12-minute cycle is completed, use a coated pair of tongs to turn each wing over.

11. Close the crisping lid, press the AIR CRISP button, and set the temperature to 390 again.

12. Set the TIME to 12 more minutes, and press the START button.

13. When the second 12-minute cycle is completed, remove the wings and toss them in the sauce of your choice. If desired, dry powdered sauce can be mixed with melted butter and brushed on wings after cooking is completed.